Your partner for printing and hot stamping
Optimize your production with our support. Our product range for the graphic industry and plastic-processing industrial bookbinders
Pad for hot foil stamping
In the case of hot foil stamping, depending on the material to be stamped, a base is usually required which is used to compensate for the irregularities and tolerances between the stamp and the material. Other factors such as the material surface, the embossing machine and the desired quality also play a decisive role. There are usually 3 versions of the pad. Hard, medium and soft lift. In addition to these, you can also use different combinations of the materials offered.
For example:
- Pressboard with polyester film
- blanket with Pertinax
Our materials were developed for the hot stamping and die cutting area and tested together with leading stamping foil manufacturers.
We are naturally interested in the further development and improvement of the documentation materials and can also procure different or new products for you.
HP Phenolic Hard Paper – Pertinax Type 2061.
Available in 0,3-0,5-0,8 and 1,0mm thickness.
MHP – melamine-coated phenolic hard paper
Particularly suitable for products printed on both sides. More heat resistant than HP, less wave formation due to the influence of heat.
Available in 1,0 mm thickness.
Thermoboard – epoxy resin – coated glass fabric with a smooth surface
Highly resilient elevator material also for cylinder machines thanks to its elasticity, heat resistance and tool life.
Thermoboard N (heat resistant up to 140 ° C)
Thermoboard 305 (heat resistant up to 180 ° C)
Available in 0,3 – 0,5 – 0,7 – 1,0 mm thickness
Pressboard (smooth surface) – hard cardboard heavily calendered, offers somewhat higher elasticity between the die and the material to be embossed.
Available in thicknesses from 0.2 to 1.0mm.
Premium pressboard – pressboard with a higher density of around 10% with a smooth surface and a long service life. Particularly suitable for combination lifts for cylinder machines.
Available in thicknesses from 0.2 to 1.0mm. Recommended thickness 0.5mm.
Crystal clear polyester film (offset film). Also called polyfol.
Suitable for combinations with Pertinax or pressboard. Higher gloss of the embossing on rough surfaces.
Available in thicknesses 0.18 – 0.35mm.
Polyamide film – used in lifting machines in the label area and for heavy
Embossable surfaces, lacquers. Very good gloss but shorter service life.
Available in thicknesses of 0.5 and 1.0 mm.
Glass bead cloth / Superpress
Available in thickness 0.65mm – width and length on request
Letterpress blanket SY
Available in thickness 0.3mm – width and length on request
Cardboard:
Available in thicknesses of 1.0 and 1.6mm